99-06 Chevy Silverado/GMC Sierra Charcoal 6.5ft Short Bed
Line-X sprayed-in bedliner on the floor and top rails. This bed shows cosmetic wear from active use but remains structurally solid and ready for a work truck setup.
Please read the detailed condition notes and view all photos before purchasing. Some dents are difficult to capture due to lighting and camera angles.
Included & Excluded Items
- Included: Factory-applied Line-X sprayed-in bedliner (floor and top rails).
- Excluded: Does NOT include taillights or tailgate.
Detailed Condition Report
Bed Rails & Exterior Sides
- Top Rails: Dings and dents are present along the entirety of both the left and right top rails.
- Sides: Surface scratches visible on both the driver and passenger exterior sides.
Right Hand (Passenger) Side Damage
- RH Front: One 6-inch crease and two dime-sized dings on the upper section.
- RH Lower Front: Three quarter-sized dents.
- RH Wheel Arch: Two quarter-sized dents caused by a ratchet strap.
- RH Rear: Three dime-sized dings on the upper rear section.
- RH Lower Rear: One faint 8-inch crease.
Left Hand (Driver) Side Damage
- LH Front: One quarter-sized dent located near the fuel door.
- LH Lower Front: One dime-sized ding.
- LH Wheel Arch: Two large, baseball-sized dents and a noticeable bend in the arch molding.
- LH Lower Rear Wheel Arch: Edge of the lower arch is bent upward.
- LH Lower Rear: Lower panel section is dented upward.
Notes: Ideal for a working truck, fleet replacement, or utility build where cosmetic perfection is not required.
Important Buying Policies
- Pickup Only: Strictly NO shipping due to the size and risk of freight damage.
- Truck Beds are Pickup Only!
- Color Match: We Do Not Guarantee Color Matching or Paint Codes.
- Handling Note: Due to handling, beds could have a minor dent or ding on the top rails or bedsides.
- Sold As-Is: All beds are sold as-is. It is the customer's responsibility to carefully examine the photos to verify damage and imperfections.
- Photos: We take over 20–30 pictures of each bed. If you need a specific angle, please let us know.
